玻璃钢浮雕是浮雕的一种成品类型，具有质轻，耐腐蚀，利息相对较低的特点。又称FRP学称纤维增强塑料，国内在习惯上称之为玻璃钢。以合成树脂为基体材料，以玻璃纤维及其制品为增强资料组成的复合资料。

    The glass steel relief is a kind of product of the relief, has the characteristics of light weight, corrosion resistance, and low interest. Also known as FRP, said fiber reinforced plastics, domestic in the habit of calling it the glass steel. Composite material, which is composed of synthetic resin as matrix material and glass fiber and its products as reinforcing material.

    铸铜浮雕艺术创作的复原性好，铸铜的工艺要比锻铜复杂，因此适合成为精细作品的资料，很受艺术家的喜爱，尤其人物雕塑最为罕见。但其容易氧化，所以要多注意保养。

    The restoration of the bronze relief art is good, and the process of casting copper is more complex than that of wrought copper. Therefore, it is very popular with the artist. But it is easy to oxidation, so pay more attention to maintenance.

    玻璃钢浮雕一般比较大的用涂刷方式制作，玻璃钢使用树脂与其他化学助剂混合后在模局内部进行化学反应成型，很小的灌实心并用真空泵抽真空的方式制作，

    Glass steel relief is generally relatively large with the use of the method of production, the use of glass fiber reinforced plastic and other chemical additives mixed in the internal chemical reaction molding, very small filling and vacuum pump vacuum pump,

    铸铜浮雕一般是内外层，将铜水从天窗内倒入模具，冷却成型，壁厚一般3-8mm，铸铜浮雕使用耐火石膏模或砂模等耐高温的模具。坚硬耐腐蚀，寿命长，但很重，利息比较高。

    Casting copper relief is generally inside and outside the layer, the copper water from the skylight into the mold, cooling, wall thickness general 3-8mm, cast copper relief using refractory plaster mold or sand mold and other high temperature resistant mold. Hard corrosion resistance, long life, but it is very heavy, relatively high interest.

    玻璃钢浮雕对大气、水和一般浓度的酸、碱、盐以及多种油类和溶剂都有较好的抵抗能力，已应用到化工防腐的各个方面，FRP良好的耐腐材料，正在取代碳钢、不锈钢、木材、有色金属等。

    Glass steel relief to the atmosphere, water and the concentration of acid, alkali, salt, and a variety of oils and solvents have better resistance, has been applied to various aspects of chemical anti-corrosion, FRP good corrosion resistance, is replacing carbon steel, stainless steel, wood, non-ferrous metals, etc..

    铸铜浮雕所处的环境必需坚持干燥且没有尘埃和空气污染物等!所处的温室温度最好控制在18℃-24℃，铸铜浮雕最重要的第一关就是环境，湿度在40%-50%。

    The environment must be dry and there is no dust and air pollutants, etc., the greenhouse temperature is best controlled at 18 -24 C, the most important first pass is the environment, humidity in 40%-50%.